











Magnesium oxide board is widely used in partition walls and ceilings of various interior decorations such as hotels, shopping malls, restaurants, night clubs, banks, hospitals, supermarkets, office buildings and domestic residences. It is completely suitable for thermal insulation structures, sound insulation walls, movable partition walls, super fire protection, fire door inner plywood, equipment box outer packaging and other areas.
What are the product features of magnesium oxide board?
What are the characteristics of raw materials of magnesium oxide board?
What is the main material of magnesium oxide board?
The magnesium oxide board is made of non-combustible materials such as magnesium oxychloride, magnesium oxide, alkali-resistant glass fiber cloth, wood chips, etc., and is processed by a full set of automatic assembly line equipment with a special production process. It has many advantages such as environmental protection, odorless, non-toxic, non-flammable, smoke-free, high-strength and light-weight, sound insulation and heat preservation, waterproof and fireproof, non-freezing and non-corrosion, minimal expansion and shrinkage rate, no cracking, no deformation, etc.
Magnesium oxide board is a ternary system of magnesium oxide (MgO), magnesium chloride (MgCl2), and water (H2O), which is prepared and made with modifiers, and has stable magnesium cementitious properties. It is a new type of non-combustible decorative material compounded by medium-alkali fiberglass mesh as reinforcing material and lightweight material as filler.
Magnesium oxide board has the characteristics of light weight, high strength, small shrinkage, easy construction, etc., especially its unique new waterproof, fireproof, corrosion-resistant, plasticity is better than the wooden multi-layer plywood, paper gypsum and other decorative materials that flood the market. For partition walls and suspended ceilings.
MgCl2 is one of the two main raw materials of magnesium oxide board. Its quality requirements mainly include two aspects. One is the effective content of MgCl2. It is clearly pointed out in the JC/r449-2000 standard that MgCl2 ≥ 43%, calcium ion Ca content ≤ 0 .7%; on the other hand, alkali metal chloride (calculated as Cl-) ≤ 1.2%, because the content of Ca and Cl- will directly affect the stability and frosting of the product. As the magnesium oxide board is rich in Cl - it is corrosive to metal and cannot be reinforced with metal for a long time. In addition to taking effective measures to prevent the existence of residual MgCl2, MgSO4·H2O or MgSO4·7H2O can also be used to replace part of MgCl2·6H2O, and silica fume can be used to replace part of light burning. MgO powder, its performance is no different from the performance of magnesium material, but the material cost is relatively high, making it difficult to popularize in a large area.
OCM products including OCM Backer, OCM Flooring, OCM SIP, OCM Deco, OCM Inno, OCM Siding, OCM Ceiling which were widely used in 178 countries and areas, such as USA, Sweden, Italy, Bulgaria, Estonia, Singapore, South Korea, Israel, Brazil, Chile, Ecuador, Malaysia, Thailand, Philippine, Syria, Russia, Panama, Turkey, etc. If you are interested in us, please call us on +86-15162322239 or send email to info@chinaocm.com.
Magnesium sulphate Board is a new generation board of magnesium Oxide Board which is also called mgso4 board.
What’s difference between Mgo board and Mgso4 board?
Mgso4 board uses magnesium sulfate instead of magnesium chloride.magnesium sulfate makes Magnesium oxide panels incredibly waterproof by preventing moisture from absorbing back into the halogens in the board.
The product is available in custom (color, size, thickness, etc.)
Standard size:900x2100mm,1000x2200mm,1200x2400mm
Thickness: 25-70mm
density:280 -550kg/M3
Products Display
1.Contains no asbestos formaldehyde, no fumes when fire resistant
2.Strong fire resistance, fire resistance up to 3 hours
3.High strength, flexible substrate
4.Waterproof and moisture proof
5.Excellent sound absorption and noise reduction
6.Excellent thermal insulation and reduced energy consumption
7.Easy to construct and save time
8.Anti-termite, anti-fungal
Description
OCM Decorative MgO Acoustic panel is using fireproof MGO board as base board, surface is fireproof HPL sheet, is processed by precision automatic equipment.
The special design, is based on the work principle of Micro porous structure system. It’s not only have good sound absorption effect, but also looks great on visual.
OCM Decorative MgO Acoustic panel is fireproof acoustic panel. It’s fireproof, sound proof, moisture proof, mildew-proof, anti insects having thickness of 15 mm.
OCM Decorative MgO Acoustic panel | |
Core Material: | OCM Grey MgO board |
Front Surface: | HPL sheet according to color card |
Back Surface: | Black Thin Non-woven Fabric attached the back |
Width: | 128 mm, 197 mm or according to customer requirements |
Length: | 2400 mm or according to customer requirements |
Thickness: | 15 mm |
Groove Width | 3 mm |
Hole Aperture | 3 mm, 6 mm, 8 mm optional |
Hole Type | E: Linear Hole V: Rhombic Hole |
Tolerance: | Width±0.1 mm, length ±2 mm |
Connection: | Tongue & Groove edge |
Type: | Grooved type and Perforated type |
Structure
Decorative Grooved MgO Acoustic panel Decorative Perforated MgO Acoustic panel
A powerful 7.5-magnitude earthquake struck Papua New Guinea early on Monday (Feb 26), officials said.
The quake hit PNG's mountainous interior .The quake's epicentre was around 90 kilometers (55 miles) south of Porgera in Enga province, according to the US Geological Survey, and hit at a depth of 35 kilometers. Fortunately,US scientists said there was no tsunami threat .
However ,USGS said some casualties and damage were possible and recent earthquakes in the area had caused landslides.
It said homes in the region were "a mix of vulnerable and earthquake resistant construction".
China OCM earthquake-proof magnesium oxide wall panel is mgo and MgCl2. It is characterized by waterproof ,fireproof and not deformation.
Structural insulated panels (SIPs for short) also called sandwich board is earthquake proof material, which has a three-layered structure consisting of sheets of structural boards, and insulation layer between them. All the details of such panels are glued together by hot pressing.
Our mission is to provide safe, affordable and green materials for worldwide!
If you want to know more about China OCM earthquake proof material , Please Call us on +86-15162322239 or Send email to info@chinaocm.com.
Where can sanded mgo boards be used in the kitchen? Today we will answer this question for you. In response to this problem, we should know that the sanded mgo board in the kitchen is high temperature resistant, flame retardant, sound insulating, shockproof, insect proof, waterproof and moisture proof, light weight, corrosion resistant, odorless and pollution free. Direct painting, direct paste tile. The surface has good colorability, high strength, bending strength, good toughness, can be nailed, sawn and glued, and is easy to decorate. It can also be combined with various thermal insulation materials to form thermal insulation composite panels.
What applications are there for sanded mgo boards in the kitchen?
What are the relevant parameters of the sanded mgo board?
Where is the safety of sanded mgo boards reflected?
Grinded mgo board can be used as wall panel, ceiling, kitchen magnesium crystal glass magnesium board, waterproof board, packaging box etc. used in the kitchen. Grinded mgo panels can be used as a substitute for plywood for wall cladding, window sills, door cladding, furniture and other interior furnishing items. In addition, we should understand that it can also be used as a mixed paint and clear lacquer as required, and can be processed into different types of plate surfaces. At the same time, it can be used in projects in humid environments such as cellars, civil air protection and mines.
In addition, we should understand the use of the ground mgo board in the kitchen: the ground mgo board in the kitchen can be done by sawing, planing, nailing, etc. projects are processed or transformed into the structure of various decorative elements.
1. Size: Since the sanded mgo board is a multi-material composite panel, the width of the handmade panel is 600-1184mm (not standard), and the length is arbitrary, however, it is recommended to be less than 8m.
2. Thickness: The conventional thickness is 50 mm and can also be made in 75 mm and 100 mm according to the actual needs of customers.
3. Fire protection: Sanded mgo board is a non-flammable A1 class product according to ASTM E-136 standard, and the fire resistance limit is more than 2 hours.
Grinded mgo board has a high quality fire protection performance. It's not a gas board. It can ensure the highest fire protection effect. It has a high quality decoration background wall system and the fire protection time is guaranteed for more than 3 hours. When the fire is ignited, it can digest a lot of energy from it, the long-term delay effect and the increase of the near operating temperature. It is the raw material with the best fire protection performance in construction engineering and building decoration materials.
OCM products are widely used in 178 countries and territories, such as USA, Sweden, Italy, Bulgaria, Estonia, Singapore, South Korea, Israel, Brazil, Chile, Ecuador, Malaysia, Thailand, Philippines, Syria, Russia, Panama, Turkey etc.
The production line of sanded mgo board needs to meet the requirements of complete functions, professional equipment and complete specifications. From material preparation to factory inspection, every process must be strictly implemented to ensure the stable output of product quality.
What is the production line process of the sanded mgo board?
How to choose sanded mgo board according to material properties?
How to choose sanded mgo board according to chloride ion content?
Material preparation: magnesium oxide, magnesium chloride, perlite, non-woven fabric, glass cloth, sawdust, and water are put into the mixer after quantitative measurement to form raw material slurry.
Forming and conveying: the non-woven fabric and glass cloth are uncoiled and then enter the forming machine. The mold is placed on the platform of the forming machine and is ready for use. The slurry of the mixer falls on the mold and enters the forming machine, and extrudes the glass magnesium plate of the required specification on the forming machine. , and then cut into required lengths, and distributed into the oxidation chamber for oxygen protection through the transit transverse system.
Dehalogenation: Soak the oxidized sanded mgo board in water for dehalogenation.
Trimming: The sanded mgo board after dehalogenation is processed by an automatic trimmer to complete the fixed-length trimming, packaging and stacking of the glass magnesium board. After the stacking is completed, it is transported to the packaging area by a forklift for inspection and packaging, and the complete production line process is completed.
In the production process of sanded mgo board, to control the flatness of the product and not to deform It brings a lot of troubles and its negative effects, and it is also a relatively common contradiction in the market. The so-called corner-cutting situation at the expense of product quality because of cost savings and production cycle The customer makes a clear comparison on price and quality.
Chloride ion content: At present, most parts of the world have made clear regulations on the chloride ion content of sanded mgo board, and the proportion should not exceed 10%. Because the chloride ion content is too high, it will cause the product to effluent and return to moisture, which is also called return to halogen in the industry. Because once the product returns to halogen, it is impossible to continue to use it, it must be removed and replaced, and there is no other remedy. Therefore, preventing the return of halogen is the first priority to identify the quality of the fireproof board. The products that will return to the halogen are worthless products, no matter how beautiful their appearance is, there is no real meaning.
Oriental Construction Material (SuZhou) Co., Ltd has committed to providing the most suitable sanded mgo boards at a reasonable price.
Grinded magnesium oxide plates are made of magnesium oxide, magnesium chloride and ternary water system after configuration and addition of modifiers. It has the characteristics of fireproof and waterproof, and can be used as wall panel, ceiling panel, fireproof panel and waterproof panel.
What are the performance characteristics of sanded mgo boards?
What is the utility value of sanded mgo boards?
What are the classifications of sanded mgo boards?
Sanded mgo board, commonly known as magnesia board, is a ternary system of magnesium oxide, magnesium chloride and water, which is a novel, non-flammable decorative material composed of light materials as fillers. It is processed by special production technology and has the characteristics of fire protection, waterproof, tasteless, non-toxic, non-freezing, non-corrosive, not cracked, unchanged, non-flammable, high strength and light weight, convenient construction and long service life. It is one of the similar products in the country. There are special composite properties.
The application of sanded mgo board is very wide, the most common fireproof panel, fireproof decor panel, fireproof door core panel and other applications. It can be used as wall panels, ceiling panels, fireproof panels, waterproof panels, packaging boxes, etc. Wood plywood can be replaced for wall cladding, doors and windows, door cladding, furniture, etc. It can also be painted with mixture color and clear lacquer on the surface as needed, and can be processed into different types of plate surfaces. It can also be used in projects in humid environments such as cellars and mines and combined with various thermal insulation materials to form thermal insulation composite panels.
Grinded MGO board is divided into
1. Box type handmade board
2. Handmade board with tongue and groove
The products are used in large ceiling enclosures of clean rooms in companies such as electronics, food, medicine and hospitals.
3. Good physical and chemical properties, the steel surface of the product is a high quality polyester baking coating or zinc coating, stainless steel plate, so the corrosion resistance is very good.
The sanded mgo board fillers are all Class A flame retardant materials that do not melt when burned, and there are no decomposition droplets at high temperatures. It is currently a high quality refractory composite panel for building decoration in China. The product has high strength, impact resistance and good impact resistance. The products are all handmade and can be manufactured in fixed length and width according to the project requirements. The combined installation can not only significantly reduce the cost of basic engineering and structural design of buildings, but also can be disassembled and assembled many times, which is convenient for construction and installation, and the comprehensive advantages are very significant.
OCM (Oriental Construction Material) is located in Zhangjiagang City, Jiangsu Province, China.
Since 2010, we have specialized in ecological construction industry, innovation, production and distribution of refractory building materials. Our refractory wall materials have passed the international tests such as CE and ASTM.