











Fire resistant wall panels are not essential decoration materials.However, some areas are essential materials, especially in some fire disaster.If we use ordinary materials for decoration, it is secure enough.So, fireproof board is popular in construction area.Since it is so important to our life, what should we care when we buy it?
Fire resistant board is a first-class new composite materials which is also known as high-pressure decorative refractory board or thermosetting resin impregnated paper high pressure laminated board, is decorated with refractory building materials, rich surface color.As well as special physical properties. Fire board can be used in many places home furnishings, such as table, furniture, surface, staircase, etc., just the fire board and sheet metal paste can be closely together.
Fire board characteristics; fire just fire board unilateral performance, fire board also has some other high-quality features. After the protection of polyamide and phenolic resin, high temperature and high pressure after pressing, it also has a general decorative panels catch up with the characteristics: wear, impact resistance, heat, acid and alkali, smoke burning, fire, Mildew and antistatic. Many of the devastating behavior that may occur in the room, the fire board has a strong tolerance.
Fireproof board appearance of many colors, imitation wood, imitation stone, metal finishes, etc., which can show the appearance of the effect is indeed very diverse. Different appearance of the fire board for the use of places are also different.
Fire board misunderstanding: fire is not afraid of fire; some consumers believe that cabinets and other paste after the fire board, the foolproof, timely fire is not afraid of fire. In fact, this is a common misunderstanding about the fire board. Fire board is actually a refractory board, with a certain fire resistance, that is, with a fire barbecue for some time before the chemical reaction is carbonated.
Through the introduction of the above, I believe we have a certain understanding of the fireproof board specifications.If you need to buy fireproof construction material, welcome to contact us directly.
When build your home ,Most people usually think about using standard drywall but fireboard has certain properties which could be hugely
beneficial to the protection and insulation of your home.
Fireboard (Fire Retardant Mgo Board)
Fireboard is a specialized product which has a magnesium core and contains glass fibers and other non-combustible materials. The fibers act as reinforcement to keep the board from disintegrating as quickly as regular drywall. This combination makes for a solid barrier against the possibilities of fire. It is highly fire-resistant and when installed in the walls of your home, it can prevent a fire from spreading quickly from one room to another.
Drywall
Drywall is the normally preferred method of interior walls and it offers a certain amount of insulation and protection. However, it is not as fire resistant as fireboard. Drywall is made from gypsum and acts well as a passive fire protection material. The gypsum in drywall contains water crystallizations in the form of hydrates. When drywall is exposed to heat or fire, the water is vaporized and therefore it retards heat. It will contain a fire in another room until the drywall water crystals have completely dissipated and dried out. This is when drywall becomes vulnerable to fire.
If you are interested in our fire retardant mgo board, Please Call us on +86-15162322239 or Send email to info@chinaocm.com.
Where can sanded mgo boards be used in the kitchen? Today we will answer this question for you. In response to this problem, we should know that the sanded mgo board in the kitchen is high temperature resistant, flame retardant, sound insulating, shockproof, insect proof, waterproof and moisture proof, light weight, corrosion resistant, odorless and pollution free. Direct painting, direct paste tile. The surface has good colorability, high strength, bending strength, good toughness, can be nailed, sawn and glued, and is easy to decorate. It can also be combined with various thermal insulation materials to form thermal insulation composite panels.
What applications are there for sanded mgo boards in the kitchen?
What are the relevant parameters of the sanded mgo board?
Where is the safety of sanded mgo boards reflected?
Grinded mgo board can be used as wall panel, ceiling, kitchen magnesium crystal glass magnesium board, waterproof board, packaging box etc. used in the kitchen. Grinded mgo panels can be used as a substitute for plywood for wall cladding, window sills, door cladding, furniture and other interior furnishing items. In addition, we should understand that it can also be used as a mixed paint and clear lacquer as required, and can be processed into different types of plate surfaces. At the same time, it can be used in projects in humid environments such as cellars, civil air protection and mines.
In addition, we should understand the use of the ground mgo board in the kitchen: the ground mgo board in the kitchen can be done by sawing, planing, nailing, etc. projects are processed or transformed into the structure of various decorative elements.
1. Size: Since the sanded mgo board is a multi-material composite panel, the width of the handmade panel is 600-1184mm (not standard), and the length is arbitrary, however, it is recommended to be less than 8m.
2. Thickness: The conventional thickness is 50 mm and can also be made in 75 mm and 100 mm according to the actual needs of customers.
3. Fire protection: Sanded mgo board is a non-flammable A1 class product according to ASTM E-136 standard, and the fire resistance limit is more than 2 hours.
Grinded mgo board has a high quality fire protection performance. It's not a gas board. It can ensure the highest fire protection effect. It has a high quality decoration background wall system and the fire protection time is guaranteed for more than 3 hours. When the fire is ignited, it can digest a lot of energy from it, the long-term delay effect and the increase of the near operating temperature. It is the raw material with the best fire protection performance in construction engineering and building decoration materials.
OCM products are widely used in 178 countries and territories, such as USA, Sweden, Italy, Bulgaria, Estonia, Singapore, South Korea, Israel, Brazil, Chile, Ecuador, Malaysia, Thailand, Philippines, Syria, Russia, Panama, Turkey etc.
OCM® flooring is a kind of Structural Load bearing flooring which can used as container flooring.
It is manufactured by using special craft through semi-automatic product line which is widely used as container and prefabricated house flooring.
There are some features Of OCM® fireproof flooring:
+ Weather resistant
+ Immune to water damage
+ Fire resistant
+ Shatter resistant
+ Low shrinkage
+ Flexible
+ High degree of workability
+ Termite resistant.
All these features of OCM® flooring leads to the widely application in our daily life.
The production line of sanded mgo board needs to meet the requirements of complete functions, professional equipment and complete specifications. From material preparation to factory inspection, every process must be strictly implemented to ensure the stable output of product quality.
What is the production line process of the sanded mgo board?
How to choose sanded mgo board according to material properties?
How to choose sanded mgo board according to chloride ion content?
Material preparation: magnesium oxide, magnesium chloride, perlite, non-woven fabric, glass cloth, sawdust, and water are put into the mixer after quantitative measurement to form raw material slurry.
Forming and conveying: the non-woven fabric and glass cloth are uncoiled and then enter the forming machine. The mold is placed on the platform of the forming machine and is ready for use. The slurry of the mixer falls on the mold and enters the forming machine, and extrudes the glass magnesium plate of the required specification on the forming machine. , and then cut into required lengths, and distributed into the oxidation chamber for oxygen protection through the transit transverse system.
Dehalogenation: Soak the oxidized sanded mgo board in water for dehalogenation.
Trimming: The sanded mgo board after dehalogenation is processed by an automatic trimmer to complete the fixed-length trimming, packaging and stacking of the glass magnesium board. After the stacking is completed, it is transported to the packaging area by a forklift for inspection and packaging, and the complete production line process is completed.
In the production process of sanded mgo board, to control the flatness of the product and not to deform It brings a lot of troubles and its negative effects, and it is also a relatively common contradiction in the market. The so-called corner-cutting situation at the expense of product quality because of cost savings and production cycle The customer makes a clear comparison on price and quality.
Chloride ion content: At present, most parts of the world have made clear regulations on the chloride ion content of sanded mgo board, and the proportion should not exceed 10%. Because the chloride ion content is too high, it will cause the product to effluent and return to moisture, which is also called return to halogen in the industry. Because once the product returns to halogen, it is impossible to continue to use it, it must be removed and replaced, and there is no other remedy. Therefore, preventing the return of halogen is the first priority to identify the quality of the fireproof board. The products that will return to the halogen are worthless products, no matter how beautiful their appearance is, there is no real meaning.
Oriental Construction Material (SuZhou) Co., Ltd has committed to providing the most suitable sanded mgo boards at a reasonable price.
We are sincerely to inform you that we return on work today!
Hope a win-win cooperation.our products mgo sulfate board can use from ceiling to floor and everything between.
We are aiming to supply most safe, affordable and easy building solutions.
Any inquiries, Please Call us on +86-15162322239 or Send email to info@chinaocm.com.
This is the photo of the container with sanding board on August 11, 2022 at 2:00 p.m. It is safely packed and perfectly packaged.
Sanding plate has single sand and double sand two categories.
Sanded mgo board surface treatments can be varied,such as sanding and polishing,which made board smoother and flatter,the thickness is more accurate which is suitable for lamination with PVC film,HPL and paper.
The application is lamination with PVC film,HPL sheet and paper.Flooring core for composite flooring replace of PVC and SPC.
The features is one side polish,one side sanding treatment or two sides sanding treatment.UV or waterproof painting coated also available.
Wood grain fiber cement board is a kind of Decorative fiber cement board,With high temperature and high pressure steaming
treatment. It is prepainting in our factory. Its waterproof used popular for exteroir wall siding and cladding.
MONET IS A WOOD GRAIN SIDING.EASY TO MAINTAIN AND RESISTANT TO MOLD. HARD AS STONE, BEAUTIFUL AS WOOD, OUR SIDINGS RANGE OFFERS YOU DIFFERENT SOLUTIONS DEPENDING ON YOUR NEEDS.
FCB SIDING .MONET AVAILABLE IN 24 COLOURS, WITH A WOODGRAIN OR SMOOTH FINISH TO CREATE A PERFECT AESTHETIC FINISH.
Thickness | 78mm,10mm,12mm |
Length | 3000mm,3660mm |
Width | 200mm,210mm |
Density | 1.8kg/m2 |
Connection type | Shiplap,T&G |
Color | RAW CEMENT |
Single Color | |
Double Color |
Advantages:
•Extensive selection of standard colors with various paint layers
•Can be placed horizontally or vertically
•Very maintenance-friendly: simply wash with soap and water
•Dimensional stability: panels don't move due to temperature changes (unlike PVC or wood)