











The magnesium oxide board is made of non-combustible materials such as magnesium oxychloride, magnesium oxide, alkali-resistant glass fiber cloth, wood chips, etc., and is processed by a full set of automatic assembly line equipment with a special production process. It has many advantages such as environmental protection, odorless, non-toxic, non-flammable, smoke-free, high-strength and light-weight, sound insulation and heat preservation, waterproof and fireproof, non-freezing and non-corrosion, minimal expansion and shrinkage rate, no cracking, no deformation, etc.
What are the characteristics of the use of magnesium oxide board?
What are the advantages of using magnesium oxide board?
What is the reason for choosing magnesium oxide board?
1. Storage
The magnesium oxide board can resist bad weather, but in order to keep it dry during use, it is recommended that the user should store it indoors, and the ground should be flat or plywood.
2. Processing
The magnesium oxide board can be broken by a hand saw, a chainsaw, or a utility knife with a ruler. It can be fixed with iron nails, self-tapping screws, nail gun or drilling holes.
3. Decoration
The magnesium oxide board can be pasted with wallpaper, red and white beech veneer, paint, paint, tile, mosaic, etc.
The impact strength of magnesium oxide board reaches 2.5KJ/m^2, exceeding the standard ≥2.0 index.
Waterproof performance of magnesium oxide board: the inherent moisture resistance of magnesium oxide board, which is required for outdoor use of aluminum-plastic board lining board, can naturally restore to the original moisture content after rain, and will not deform or fall off. The magnesium oxide board can meet the requirements of use after a long time of practice.
Green environmental protection: Magnesium oxide board uses natural magnesia mineral powder, 100% free of harmful substances such as asbestos, formaldehyde and ammonia, and is a green environmental protection product. With its natural inorganic properties, it is moisture-proof and mildew-proof, and at the same time, its business meets the standards of insect-proof and anti-corrosion in European and American countries.
Economy: Magnesium oxide board can be used in a wide range and can replace some wood boards. It is light in weight and fast in construction. It can save 20-30% of material cost and labor cost. Making aluminum composite panel lining can save 50% of material cost, which is really high. Quality eco-friendly decorative materials.
Practicality: Magnesium oxide board can be nailed, planed, sawed, bent, tiled, used as lining board, bottom plate, easy to install water and electricity settings, making the wall more beautiful and durable.
Lightweight and anti-seismic: filled with sawdust, sawdust and other substances, the apparent density is only 0.9-1.3g/cm3, which greatly reduces the load of the building. At the same time, magnesium oxide board increases the usable area by 60% compared with ordinary decoration boards.
The magnesium oxide board is installed quickly, saving your precious time.
OCM products are widely used in 178 countries and areas, such as USA, Sweden, Italy, Bulgaria, Estonia, Singapore, South Korea, Israel, Brazil, Chile, Ecuador, Malaysia, Thailand, Philippine, Syria, Russia, Panama, Turkey, etc.
Where can sanded mgo boards be used in the kitchen? Today we will answer this question for you. In response to this problem, we should know that the sanded mgo board in the kitchen is high temperature resistant, flame retardant, sound insulating, shockproof, insect proof, waterproof and moisture proof, light weight, corrosion resistant, odorless and pollution free. Direct painting, direct paste tile. The surface has good colorability, high strength, bending strength, good toughness, can be nailed, sawn and glued, and is easy to decorate. It can also be combined with various thermal insulation materials to form thermal insulation composite panels.
What applications are there for sanded mgo boards in the kitchen?
What are the relevant parameters of the sanded mgo board?
Where is the safety of sanded mgo boards reflected?
Grinded mgo board can be used as wall panel, ceiling, kitchen magnesium crystal glass magnesium board, waterproof board, packaging box etc. used in the kitchen. Grinded mgo panels can be used as a substitute for plywood for wall cladding, window sills, door cladding, furniture and other interior furnishing items. In addition, we should understand that it can also be used as a mixed paint and clear lacquer as required, and can be processed into different types of plate surfaces. At the same time, it can be used in projects in humid environments such as cellars, civil air protection and mines.
In addition, we should understand the use of the ground mgo board in the kitchen: the ground mgo board in the kitchen can be done by sawing, planing, nailing, etc. projects are processed or transformed into the structure of various decorative elements.
1. Size: Since the sanded mgo board is a multi-material composite panel, the width of the handmade panel is 600-1184mm (not standard), and the length is arbitrary, however, it is recommended to be less than 8m.
2. Thickness: The conventional thickness is 50 mm and can also be made in 75 mm and 100 mm according to the actual needs of customers.
3. Fire protection: Sanded mgo board is a non-flammable A1 class product according to ASTM E-136 standard, and the fire resistance limit is more than 2 hours.
Grinded mgo board has a high quality fire protection performance. It's not a gas board. It can ensure the highest fire protection effect. It has a high quality decoration background wall system and the fire protection time is guaranteed for more than 3 hours. When the fire is ignited, it can digest a lot of energy from it, the long-term delay effect and the increase of the near operating temperature. It is the raw material with the best fire protection performance in construction engineering and building decoration materials.
OCM products are widely used in 178 countries and territories, such as USA, Sweden, Italy, Bulgaria, Estonia, Singapore, South Korea, Israel, Brazil, Chile, Ecuador, Malaysia, Thailand, Philippines, Syria, Russia, Panama, Turkey etc.
HPL Laminated Mgo Board
Using magnesium oxide as the substrate, surface HPL panel, E0 grade environmentally friendly glue is pressed by cold pressing technology.
HPL panel
HPL material is a fireproof board, which is a fire-resistant building material for surface decoration. It has rich surface color, texture and special physical properties.
Magnesium oxide board
The MGO board is made of high-purity magnesium oxide, MGO sulfate (Mgoso4), high-strength glass fiber mesh, perlite, and non-woven fabric.
Advantages:
• Fireproof with Grade A. Non-Combustible
•Waterproof and Moisture Resistant
•High Strength, Energy-Saving, Sound Insulating
•Lightweight, Fast Installation, Time and Labor Cost-Saving
•Easy to Clean and Maintenance
•Space Saving, Long Service Life
•Eco-Friendly, Contains No Asbestos, Formaldehyde or Benzene
Specification | |
Surface and backside | One or two side laminate |
Substrate material | Mgo board or calcium silicate board |
Glue | E0 |
Standard size | 1200*2400/2700/3000mm |
Thickness | 6,8,10, 12mm |
HPL veneer thickness | 0.5-1mm |
Notice: Other small size can cut as required. |
Grinded magnesium oxide plates are made of magnesium oxide, magnesium chloride and ternary water system after configuration and addition of modifiers. It has the characteristics of fireproof and waterproof, and can be used as wall panel, ceiling panel, fireproof panel and waterproof panel.
What are the performance characteristics of sanded mgo boards?
What is the utility value of sanded mgo boards?
What are the classifications of sanded mgo boards?
Sanded mgo board, commonly known as magnesia board, is a ternary system of magnesium oxide, magnesium chloride and water, which is a novel, non-flammable decorative material composed of light materials as fillers. It is processed by special production technology and has the characteristics of fire protection, waterproof, tasteless, non-toxic, non-freezing, non-corrosive, not cracked, unchanged, non-flammable, high strength and light weight, convenient construction and long service life. It is one of the similar products in the country. There are special composite properties.
The application of sanded mgo board is very wide, the most common fireproof panel, fireproof decor panel, fireproof door core panel and other applications. It can be used as wall panels, ceiling panels, fireproof panels, waterproof panels, packaging boxes, etc. Wood plywood can be replaced for wall cladding, doors and windows, door cladding, furniture, etc. It can also be painted with mixture color and clear lacquer on the surface as needed, and can be processed into different types of plate surfaces. It can also be used in projects in humid environments such as cellars and mines and combined with various thermal insulation materials to form thermal insulation composite panels.
Grinded MGO board is divided into
1. Box type handmade board
2. Handmade board with tongue and groove
The products are used in large ceiling enclosures of clean rooms in companies such as electronics, food, medicine and hospitals.
3. Good physical and chemical properties, the steel surface of the product is a high quality polyester baking coating or zinc coating, stainless steel plate, so the corrosion resistance is very good.
The sanded mgo board fillers are all Class A flame retardant materials that do not melt when burned, and there are no decomposition droplets at high temperatures. It is currently a high quality refractory composite panel for building decoration in China. The product has high strength, impact resistance and good impact resistance. The products are all handmade and can be manufactured in fixed length and width according to the project requirements. The combined installation can not only significantly reduce the cost of basic engineering and structural design of buildings, but also can be disassembled and assembled many times, which is convenient for construction and installation, and the comprehensive advantages are very significant.
OCM (Oriental Construction Material) is located in Zhangjiagang City, Jiangsu Province, China.
Since 2010, we have specialized in ecological construction industry, innovation, production and distribution of refractory building materials. Our refractory wall materials have passed the international tests such as CE and ASTM.
OCM® flooring is a kind of Structural Load bearing flooring which can used as container flooring.
It is manufactured by using special craft through semi-automatic product line which is widely used as container and prefabricated house flooring.
There are some features Of OCM® fireproof flooring:
+ Weather resistant
+ Immune to water damage
+ Fire resistant
+ Shatter resistant
+ Low shrinkage
+ Flexible
+ High degree of workability
+ Termite resistant.
All these features of OCM® flooring leads to the widely application in our daily life.
Magnesium sulphate Board is a new generation board of magnesium Oxide Board which is also called mgso4 board.
What’s difference between Mgo board and Mgso4 board?
Mgso4 board uses magnesium sulfate instead of magnesium chloride.magnesium sulfate makes Magnesium oxide panels incredibly waterproof by preventing moisture from absorbing back into the halogens in the board.
The product is available in custom (color, size, thickness, etc.)
Standard size:900x2100mm,1000x2200mm,1200x2400mm
Thickness: 25-70mm
density:280 -550kg/M3
Products Display
1.Contains no asbestos formaldehyde, no fumes when fire resistant
2.Strong fire resistance, fire resistance up to 3 hours
3.High strength, flexible substrate
4.Waterproof and moisture proof
5.Excellent sound absorption and noise reduction
6.Excellent thermal insulation and reduced energy consumption
7.Easy to construct and save time
8.Anti-termite, anti-fungal
Fire resistant wall panels are not essential decoration materials.However, some areas are essential materials, especially in some fire disaster.If we use ordinary materials for decoration, it is secure enough.So, fireproof board is popular in construction area.Since it is so important to our life, what should we care when we buy it?
Fire resistant board is a first-class new composite materials which is also known as high-pressure decorative refractory board or thermosetting resin impregnated paper high pressure laminated board, is decorated with refractory building materials, rich surface color.As well as special physical properties. Fire board can be used in many places home furnishings, such as table, furniture, surface, staircase, etc., just the fire board and sheet metal paste can be closely together.
Fire board characteristics; fire just fire board unilateral performance, fire board also has some other high-quality features. After the protection of polyamide and phenolic resin, high temperature and high pressure after pressing, it also has a general decorative panels catch up with the characteristics: wear, impact resistance, heat, acid and alkali, smoke burning, fire, Mildew and antistatic. Many of the devastating behavior that may occur in the room, the fire board has a strong tolerance.
Fireproof board appearance of many colors, imitation wood, imitation stone, metal finishes, etc., which can show the appearance of the effect is indeed very diverse. Different appearance of the fire board for the use of places are also different.
Fire board misunderstanding: fire is not afraid of fire; some consumers believe that cabinets and other paste after the fire board, the foolproof, timely fire is not afraid of fire. In fact, this is a common misunderstanding about the fire board. Fire board is actually a refractory board, with a certain fire resistance, that is, with a fire barbecue for some time before the chemical reaction is carbonated.
Through the introduction of the above, I believe we have a certain understanding of the fireproof board specifications.If you need to buy fireproof construction material, welcome to contact us directly.