











Magnesium oxide board is a novel multifunctional building material. Using magnesium oxide and magnesium chloride as the main raw materials, it is made with a certain proportion of perlite, glass fiber fabric, wood fiber, etc. mixed.
Where is the performance superiority of magnesium oxide boards reflected?
What is the reason for choosing a magnesium oxide board?
What are the physical properties of magnesium oxide boards?
Water and moisture resistant. In dry, cold and humid weather, the performance of magnesium oxide boards is always stable and unaffected by condensed water droplets and damp air. Even if it is soaked in water for a few days and then taken out for natural drying, it will not deform or become soft and can be used normally. Moisture absorption and return to the halogen phenomenon occur.
After testing, magnesium oxide board has no water permeability and superior strength. Magnesite special 5.1.8-phase dense glass fiber fabric and plant fiber with good toughness make the magnesia plate light but compact in structure, good stability, no deformation and wood-like toughness. Excellent compression, tensile and breaking properties. The magnesium oxide board is both stiff and tough, with bending strength of 322 kgf/cm2 (vertical) and 216 kgf/cm2 (horizontal) and impact strength of 25 MPa.
1. High quality magnesia plate, stable and reliable quality, compared to other magnesia plates, has the ultimate cost performance, light weight and high energy, moderate price, excellent processing and installation performance, can be glued, cut, nailed, drilled, painted, planned, handled Practical, excellent toughness, not easy to break, all self-tapping screws, pistol screws and straight screws can be used for easy installation, and wet and dry hanging operations can be used.
2. Sound insulation and tranquility. Magnesium oxide panels have excellent sound insulation performance to ensure a quiet and elegant living environment. The low weight and thickness of the panel do not affect the sound insulation performance of the glass-magnesium panel. The sound insulation of the 6mm thick panel is 29 dB, and the airborne sound insulation of the double-sided single-layer 9mm glass magnesium panel75Kiel50rock wool partition wall system is larger than 42 dB, which is unique and uniform. The pore structure is not reached by other dense magnesium oxide boards.
Magnesium oxide boards are a ternary system of magnesium oxide, magnesium chloride and water produced and manufactured with modifiers. Magnesium cement material with stable performance, Glass Magnesium Plate is a new kind of non-flammable decoration material, which consists of a medium alkaline glass fiber net as reinforcement material and a light material as filler, which is increasingly used in life. The surface is painted with mixed paint and clear lacquer as required and can be processed into different types of plate surfaces. It can also be used in projects in humid environments such as cellars and mines and combined with various thermal insulation materials to form thermal insulation composite panels.
OCM (Oriental Construction Material) is located in Zhangjiagang City, Jiangsu Province, China. Since 2010, we have specialized in ecological construction industry, innovation, production and distribution of refractory building materials. Our refractory wall materials have passed the international tests such as CE and ASTM.
A powerful 7.5-magnitude earthquake struck Papua New Guinea early on Monday (Feb 26), officials said.
The quake hit PNG's mountainous interior .The quake's epicentre was around 90 kilometers (55 miles) south of Porgera in Enga province, according to the US Geological Survey, and hit at a depth of 35 kilometers. Fortunately,US scientists said there was no tsunami threat .
However ,USGS said some casualties and damage were possible and recent earthquakes in the area had caused landslides.
It said homes in the region were "a mix of vulnerable and earthquake resistant construction".
China OCM earthquake-proof magnesium oxide wall panel is mgo and MgCl2. It is characterized by waterproof ,fireproof and not deformation.
Structural insulated panels (SIPs for short) also called sandwich board is earthquake proof material, which has a three-layered structure consisting of sheets of structural boards, and insulation layer between them. All the details of such panels are glued together by hot pressing.
Our mission is to provide safe, affordable and green materials for worldwide!
If you want to know more about China OCM earthquake proof material , Please Call us on +86-15162322239 or Send email to info@chinaocm.com.
magnesium oxide board has a wide range of applications, especially for partition walls and ceilings in architectural decoration. It is fully suitable for thermal insulation structures, sound insulation walls, wet areas, movable partition walls, super fire protection, fire door plywood and other fields.
What are the main features of the magnesium oxide board?
What are the main raw materials of magnesium oxide board?
What is the reason for the popularity of magnesium oxide board in the market?
1. Magnesium oxide plate is also called magnesite plate or magnesium plate.
2. The production of magnesium oxide board consists of active high-purity magnesium oxide (MgO), high-quality magnesium chloride (MgCl) alkali resistant glass fiber cloth, extremely flexible plant fiber, incombustible and light perlite, chemically stable lithopone, polymer and high-performance modifier.
3. magnesium oxide board has the advantages of high temperature resistance, flame retardancy, sound absorption, shockproof, insect proof, anti-corrosion, non-toxic, tasteless and pollution-free, can be directly painted, directly plastered, and can be directly applied with air nails and ceramic tiles.
4. The surface of magnesium oxide board has good coloring property, high strength, bending resistance, toughness, nailing, sawing and gluing, and convenient decoration.
5. magnesium oxide board can also be combined with a variety of insulation materials to make composite insulation plates.
Light-burned magnesia powder is one of the main raw materials of magnesium oxide board, which is calcined from magnesite MgCO3 at '750% ~ 850~C. The calcination process of some manufacturers is relatively backward, especially the measures for homogenization of raw materials or ore after calcination, resulting in a large gap between the MgO content and the effective MgO content of the same batch of products, even the same bag of products. In order to unilaterally pursue production costs, some producers often use magnesia to replace light-burning powder to produce magnesia material products, which is impossible to produce high-quality magnesia fireproof boards. In order to ensure the qualification and stability of MgO raw materials and produce qualified fireproof boards, the raw materials of light-burning MgO are used, and the MgO content is 80%-85%, the active MgO content is ≮60±2%; the Ca0 content is less than 1.5%; The loss is 5%-9%; the fineness is ≮170 mesh.
1. Versatility: The unique smooth and rough surface of magnesium oxide board provides functional diversity for customers' use. Smooth surface can be pasted with wallpaper, aluminum-plastic board, veneer fireproof board, veneer, PVC, spray paint or latex paint, etc.; rough surface can be pasted with ceramic tile, marble, granite, ash and latex paint. The magnesium oxide board has an excellent affinity for the above-mentioned materials, and can be processed or used twice on site. It can be bent with a diameter of 30cm without loss of physical properties.
2. Durable and durable: the scientific formula completely solves the problem of moisture absorption and halogen return of magnesite, its strength increases with time, it can resist corrosion, acid and alkali resistance, the change of thermal expansion and cold shrinkage is small, and the dry shrinkage rate is less than or equal to 0.3%. The swelling rate is less than or equal to 0.6%, and it has the frost resistance of -40℃. After ten years of testing, the magnesium oxide board is durable, resistant to aging and has a long life.
The magnesium oxide board is made of non-combustible materials such as magnesium oxychloride, magnesium oxide, alkali-resistant glass fiber cloth, wood chips, etc., and is processed by a full set of automatic assembly line equipment with a special production process. It has many advantages such as environmental protection, odorless, non-toxic, non-flammable, smoke-free, high-strength and light-weight, sound insulation and heat preservation, waterproof and fireproof, non-freezing and non-corrosion, minimal expansion and shrinkage rate, no cracking, no deformation, etc.
What are the characteristics of the use of magnesium oxide board?
What are the advantages of using magnesium oxide board?
What is the reason for choosing magnesium oxide board?
1. Storage
The magnesium oxide board can resist bad weather, but in order to keep it dry during use, it is recommended that the user should store it indoors, and the ground should be flat or plywood.
2. Processing
The magnesium oxide board can be broken by a hand saw, a chainsaw, or a utility knife with a ruler. It can be fixed with iron nails, self-tapping screws, nail gun or drilling holes.
3. Decoration
The magnesium oxide board can be pasted with wallpaper, red and white beech veneer, paint, paint, tile, mosaic, etc.
The impact strength of magnesium oxide board reaches 2.5KJ/m^2, exceeding the standard ≥2.0 index.
Waterproof performance of magnesium oxide board: the inherent moisture resistance of magnesium oxide board, which is required for outdoor use of aluminum-plastic board lining board, can naturally restore to the original moisture content after rain, and will not deform or fall off. The magnesium oxide board can meet the requirements of use after a long time of practice.
Green environmental protection: Magnesium oxide board uses natural magnesia mineral powder, 100% free of harmful substances such as asbestos, formaldehyde and ammonia, and is a green environmental protection product. With its natural inorganic properties, it is moisture-proof and mildew-proof, and at the same time, its business meets the standards of insect-proof and anti-corrosion in European and American countries.
Economy: Magnesium oxide board can be used in a wide range and can replace some wood boards. It is light in weight and fast in construction. It can save 20-30% of material cost and labor cost. Making aluminum composite panel lining can save 50% of material cost, which is really high. Quality eco-friendly decorative materials.
Practicality: Magnesium oxide board can be nailed, planed, sawed, bent, tiled, used as lining board, bottom plate, easy to install water and electricity settings, making the wall more beautiful and durable.
Lightweight and anti-seismic: filled with sawdust, sawdust and other substances, the apparent density is only 0.9-1.3g/cm3, which greatly reduces the load of the building. At the same time, magnesium oxide board increases the usable area by 60% compared with ordinary decoration boards.
The magnesium oxide board is installed quickly, saving your precious time.
OCM products are widely used in 178 countries and areas, such as USA, Sweden, Italy, Bulgaria, Estonia, Singapore, South Korea, Israel, Brazil, Chile, Ecuador, Malaysia, Thailand, Philippine, Syria, Russia, Panama, Turkey, etc.
When build your home ,Most people usually think about using standard drywall but fireboard has certain properties which could be hugely
beneficial to the protection and insulation of your home.
Fireboard (Fire Retardant Mgo Board)
Fireboard is a specialized product which has a magnesium core and contains glass fibers and other non-combustible materials. The fibers act as reinforcement to keep the board from disintegrating as quickly as regular drywall. This combination makes for a solid barrier against the possibilities of fire. It is highly fire-resistant and when installed in the walls of your home, it can prevent a fire from spreading quickly from one room to another.
Drywall
Drywall is the normally preferred method of interior walls and it offers a certain amount of insulation and protection. However, it is not as fire resistant as fireboard. Drywall is made from gypsum and acts well as a passive fire protection material. The gypsum in drywall contains water crystallizations in the form of hydrates. When drywall is exposed to heat or fire, the water is vaporized and therefore it retards heat. It will contain a fire in another room until the drywall water crystals have completely dissipated and dried out. This is when drywall becomes vulnerable to fire.
If you are interested in our fire retardant mgo board, Please Call us on +86-15162322239 or Send email to info@chinaocm.com.
Magnesium oxide board is widely used in partition walls and ceilings of various interior decorations such as hotels, shopping malls, restaurants, night clubs, banks, hospitals, supermarkets, office buildings and domestic residences. It is completely suitable for thermal insulation structures, sound insulation walls, movable partition walls, super fire protection, fire door inner plywood, equipment box outer packaging and other areas.
What are the product features of magnesium oxide board?
What are the characteristics of raw materials of magnesium oxide board?
What is the main material of magnesium oxide board?
The magnesium oxide board is made of non-combustible materials such as magnesium oxychloride, magnesium oxide, alkali-resistant glass fiber cloth, wood chips, etc., and is processed by a full set of automatic assembly line equipment with a special production process. It has many advantages such as environmental protection, odorless, non-toxic, non-flammable, smoke-free, high-strength and light-weight, sound insulation and heat preservation, waterproof and fireproof, non-freezing and non-corrosion, minimal expansion and shrinkage rate, no cracking, no deformation, etc.
Magnesium oxide board is a ternary system of magnesium oxide (MgO), magnesium chloride (MgCl2), and water (H2O), which is prepared and made with modifiers, and has stable magnesium cementitious properties. It is a new type of non-combustible decorative material compounded by medium-alkali fiberglass mesh as reinforcing material and lightweight material as filler.
Magnesium oxide board has the characteristics of light weight, high strength, small shrinkage, easy construction, etc., especially its unique new waterproof, fireproof, corrosion-resistant, plasticity is better than the wooden multi-layer plywood, paper gypsum and other decorative materials that flood the market. For partition walls and suspended ceilings.
MgCl2 is one of the two main raw materials of magnesium oxide board. Its quality requirements mainly include two aspects. One is the effective content of MgCl2. It is clearly pointed out in the JC/r449-2000 standard that MgCl2 ≥ 43%, calcium ion Ca content ≤ 0 .7%; on the other hand, alkali metal chloride (calculated as Cl-) ≤ 1.2%, because the content of Ca and Cl- will directly affect the stability and frosting of the product. As the magnesium oxide board is rich in Cl - it is corrosive to metal and cannot be reinforced with metal for a long time. In addition to taking effective measures to prevent the existence of residual MgCl2, MgSO4·H2O or MgSO4·7H2O can also be used to replace part of MgCl2·6H2O, and silica fume can be used to replace part of light burning. MgO powder, its performance is no different from the performance of magnesium material, but the material cost is relatively high, making it difficult to popularize in a large area.
OCM products including OCM Backer, OCM Flooring, OCM SIP, OCM Deco, OCM Inno, OCM Siding, OCM Ceiling which were widely used in 178 countries and areas, such as USA, Sweden, Italy, Bulgaria, Estonia, Singapore, South Korea, Israel, Brazil, Chile, Ecuador, Malaysia, Thailand, Philippine, Syria, Russia, Panama, Turkey, etc. If you are interested in us, please call us on +86-15162322239 or send email to info@chinaocm.com.
OCM® Board is Magnesium oxide board also called mgo sulfate board.It is made of high Purity Magnesia oxide,MgSO4 replace of MgCl2,Woodchip,Perlite,High Strength fiber glassmesh,Non-woven fabrics.It is a multi-function fire-resistant decorative building material.
OCM Mgo board is made from high purity magnesium oxide powder, magnesium oxide-sulfate, reinforced by glass mesh fiber. It is an improved mgo board which also called Mgso4 Board. Its advantage is NO Sweating, NO Corrosion when apply on steel, metal and aluminum. It can used for a number of applications like ceiling, interior wall, exterior cladding, soffits, tile backings, subflooring and substrate for decorative materials, furniture and fireproof door.
OCM Mgso4 board is non-combustible and can achieve 270 mins fire resistance given the correct installation. It can use in both residential and commercial buildings.
OSB stands for “Oriented Strand Board".OSB is made from thin veneer strands that are bonded together with a synthetic resin. OSB consists of three cross-oriented layers with the surface of the board formed from strands oriented along the length of the board and the core strands arranged in cross orientation. OSB sandwich panels which has a three-layered structure consisting of sheets of structural boards, and insulation layer between them. All the details of such panels are glued together by hot pressing.
Standard size 1220*2440mm
Advantage
1) Tight construction and high strength
2) Minimum twisting, delamination or warping
3) No rotten or decay, strong against corrosion and fire
4) Water proof, consistent when exposed in the natural or wet environment
5) Low formaldehyde emission
6) Good nailing strength, easy to be sawn, nailed, drilled, grooved, planed, filed or polished
7) Good heat and sound resistant, easy to be coated